Public engineering report
IC3D Standard PETG Lime
Public-data contract: This static report contains only allowlisted material identity, public links, canonical MSRP and existing Verified Material Summary / governed score outputs. It excludes raw specimen rows and non-public operational data.
Rigid test coverage
Partial; 1/5 score families; Izod/Charpy 0/2 measured, 0/2 scored; Overall unavailable: missing measurements or references; policy engineering-score-v70-1
Engineering axes
1/8
Public MSRP
$39.00 USD/kg
Material identity
| MaterialID | MAT0058 |
|---|---|
| Material | IC3D Standard PETG Lime |
| Manufacturer | IC3D |
| Product line | Standard |
| Base material | PETG |
| Category | Standard |
| Variant / finish | — |
| Reinforcement | — |
| Color | Lime |
Governed engineering profile
| Overall | — |
|---|---|
| Tensile | — |
| Impact | — |
| Izod | — |
| Charpy | — |
| Stiffness | 40/100 |
| Consistency | — |
| Layer adhesion | — |
| Thermal | — |
| Best available axis | stiffness |
Engineering score profile
Engineering radar
Selected material
Material average - PETG
Manufacturer average - IC3D
Legacy Impact radar: —. This historical visual reference is the mean corrected Flat/Upright result divided by the matching rig capacity; it is not a modern engineering score.
Izod and Charpy use versioned method references and together form one equally weighted impact family. Overall requires all five families and both calibrated methods; incomplete profiles are not ranked. Legacy Impact and thermal are outside Overall. Missing axes have gaps with no marker or filled polygon; measured zero retains a centre marker.
Fixture thermal result
— · score — · method —
—
—
Material and manufacturer context
| Metric | Selected material | Material average | Manufacturer average |
|---|---|---|---|
| Overall | — | — | — |
| Tensile | — | 28/100 | 26/100 |
| Impact | — | — | — |
| Izod | — | 5/100 | — |
| Charpy | — | 4/100 | — |
| Stiffness | 40/100 | 60/100 | 40/100 |
| Consistency | — | 74/100 | 79/100 |
| Layer adhesion | — | 31/100 | 43/100 |
| Thermal | — | — | — |
Verified measurement results
Existing Verified Material Summary outputs. The public renderer does not read raw specimen rows or recalculate these values.
| Measurement | Average | Std. deviation | CV | Samples | Confidence |
|---|---|---|---|---|---|
| Tensile upright | — | — | — | — | — |
| Tensile flat | — | — | — | — | — |
| Impact upright | — | — | — | — | — |
| Impact flat | — | — | — | — | — |
| Izod | — | — | — | — | — |
| Charpy | — | — | — | — | — |
| Stiffness modulus | 1198.131 MPa | — | — | — | — |
| Stiffness deflection | 4.529 mm | — | — | — | — |
Measurement provenance
Canonical per-module measured dates from SQLite, shown in unambiguous ISO format. Missing dates are not inferred.
| Module | Measured date |
|---|---|
| Tensile | Not recorded |
| Impact | Not recorded |
| Izod | Not recorded |
| Charpy | Not recorded |
| Stiffness | Not recorded |
| Thermal | Not recorded |
Engineering interpretation
Summary: IC3D Standard PETG Lime has a profile awaiting complete scoring evidence. It is without enough material-family average context and without enough manufacturer average context. Its strongest measured axis is Stiffness, while the weakest axis is Stiffness.
Data-driven review: IC3D Standard PETG Lime has incomplete scoring evidence or pending method references. Overall suitability and ranking are unavailable. Available scored axes can be inspected separately; missing scores do not establish weak material performance.
Best feature
Stiffness
Main limitation
Stiffness
Dataset position
—
—
Strengths
- Best available signal: Stiffness at 40/100.
Limitations
- Stiffness: 40/100. Expect less shape stability than the stronger materials in the same family.
Engineering trade-offs
- Complete scoring evidence and approved method references are required before assessing an overall balance of properties.
Recommended applications
- Application guidance awaits sufficient measured evidence and approved score references
Metric rankings and percentiles
| Metric | Score | Rank | Percentile |
|---|---|---|---|
| Overall | — | — | — |
| Tensile | — | — | — |
| Impact | — | — | — |
| Izod | — | — | — |
| Charpy | — | — | — |
| Stiffness | 40/100 | 232 / 240 | Better than 4% |
| Consistency | — | — | — |
| Layer adhesion | — | — | — |
| Thermal | — | — | — |
Decision guidance
- Overall suitability is unavailable until the required measurements and method references are complete.
Better alternatives
| MaterialID | Material | Manufacturer | Overall | Tensile | Impact | Izod | Charpy |
|---|---|---|---|---|---|---|---|
| No stronger same-base-material alternatives were identified in the current governed dataset. | |||||||
Peer context
Highest-scoring same-base-material peers from the current governed dataset. This context is descriptive and is not recalculated by the public renderer.
| MaterialID | Material | Manufacturer | Overall | Tensile | Impact | Izod | Charpy |
|---|---|---|---|---|---|---|---|
| MAT0236 | Yasin Standard Black PETG CF Black | Yasin | 47/100 | 30/100 | — | n/a | n/a |
| MAT0198 | Siraya Tech Fiberheart Black PETG Pro CF Black | Siraya Tech | 46/100 | 33/100 | — | n/a | n/a |
| MAT0235 | Yasin Standard Black PETG GF Black | Yasin | 44/100 | 27/100 | — | n/a | n/a |
| MAT0048 | Prusa3D Prusament Jet Black PETG V0 Black | Prusa3D | 44/100 | 26/100 | — | n/a | n/a |
| MAT0042 | Prusa3D Prusament PETG CF Black | Prusa3D | 42/100 | 25/100 | — | n/a | n/a |
| MAT0043 | Prima Creator PrimaSelect PETG GF White | Prima Creator | 40/100 | 31/100 | — | n/a | n/a |
| MAT0266 | Coex 3D Standard Banana Yellow PETG Yellow | Coex 3D | 40/100 | 30/100 | — | n/a | n/a |
| MAT0061 | Prusa3D Prusament Signal White PETG White | Prusa3D | 39/100 | 33/100 | — | n/a | n/a |
Public links
Methodology and limitations
Results are comparative 3DPIceland measurements from home-built test equipment. Thermal is a nearby BlueDOT probe-indicated fixture temperature, not ASTM D648, ISO 75 or specimen temperature. Missing evidence remains n/a. Scores and test results are not recalculated by this publishing layer and do not replace certified manufacturer datasheets or accredited laboratory testing.