Public engineering report
Winkle Standard PLA HD Blue
Public-data contract: This static report contains only allowlisted material identity, public links, canonical MSRP and existing Verified Material Summary / governed score outputs. It excludes raw specimen rows and non-public operational data.
Test coverage
Partial
Engineering axes
3/6
Public MSRP
$44.67 USD/kg
Material identity
| MaterialID | MAT0120 |
|---|---|
| Material | Winkle Standard PLA HD Blue |
| Manufacturer | Winkle |
| Product line | Standard |
| Base material | PLA |
| Category | Standard |
| Variant / finish | HD |
| Reinforcement | — |
| Color | Blue |
Governed engineering profile
| Overall | 35/100 |
|---|---|
| Tensile | — |
| Impact | 7/100 |
| Stiffness | — |
| Consistency | 64/100 |
| Layer adhesion | — |
| Thermal | 26/100 |
| Best available axis | consistency |
Engineering score profile
Engineering radar
Selected material
Material average - PLA
Manufacturer average - Winkle
All axes use existing governed 0–100 engineering scores. Missing axes are shown at zero and remain listed as n/a elsewhere in the report.
Fixture thermal result
52 °C · score 26/100 · method 3dp-thermal-deflection-fixture-v1
Nearby BlueDOT probe-indicated fixture temperature from a non-standard comparative 3DPIceland method; not ASTM D648, ISO 75, specimen temperature, certified HDT or a manufacturer limit.
Nearby BlueDOT probe-indicated fixture temperature from a non-standard comparative 3DPIceland method; not ASTM D648, ISO 75, specimen temperature, certified HDT or a manufacturer limit.
Material and manufacturer context
| Metric | Selected material | Material average | Manufacturer average |
|---|---|---|---|
| Overall | 35/100 | 50/100 | 49/100 |
| Tensile | — | 29/100 | 31/100 |
| Impact | 7/100 | 24/100 | 21/100 |
| Stiffness | — | 87/100 | 85/100 |
| Consistency | 64/100 | 79/100 | 78/100 |
| Layer adhesion | — | 30/100 | 33/100 |
| Thermal | 26/100 | — | — |
Verified measurement results
Existing Verified Material Summary outputs. The public renderer does not read raw specimen rows or recalculate these values.
| Measurement | Average | Std. deviation | CV | Samples | Confidence |
|---|---|---|---|---|---|
| Tensile upright | — | — | — | — | — |
| Tensile flat | — | — | — | — | — |
| Impact upright | 33.343 kJ/m² | 15.797 kJ/m² | 47.4% | 10 | 10/10 |
| Impact flat | 98.232 kJ/m² | 9.84 kJ/m² | 10% | 10 | 10/10 |
| Stiffness modulus | — | — | — | — | — |
| Stiffness deflection | — | — | — | — | — |
Measurement provenance
Canonical per-module measured dates from SQLite, shown in unambiguous ISO format. Missing dates are not inferred.
| Module | Measured date |
|---|---|
| Tensile | Not recorded |
| Impact | Not recorded |
| Stiffness | Not recorded |
| Thermal | Not recorded |
Engineering interpretation
Summary: Winkle Standard PLA HD Blue has a specialized or limited engineering profile. It is below its material-family average by 14,9 points and below its manufacturer average by 13,9 points. Its strongest measured axis is Consistency, while the weakest axis is Impact.
Data-driven review: Winkle Standard PLA HD Blue is best understood as a limited-use material that should be validated carefully before functional use. Compared with the current verified dataset, it ranks better than 2% overall, is below the material-family average by 14,9 points, and is below the manufacturer average by 13,9 points. Its strongest engineering signal is Consistency, while Impact is the main limitation to consider before using it for demanding applications.
Best feature
Consistency
Main limitation
Impact
Dataset position
Better than 2%
230 / 234
Strengths
- Best available signal: Consistency at 64/100.
Limitations
- Impact: 7/100. Avoid high impact or shock-loaded components without additional validation.
- Consistency: 64/100. Repeatability may not be the best reason to choose this filament.
Engineering trade-offs
- Good repeatability does not compensate for low tensile capability in load-bearing designs.
- The report should be read as a suitability warning rather than a general-purpose recommendation.
Recommended applications
- Cosmetic parts, concept models or low-load prototypes
- Avoid high tensile load applications
- Avoid high impact components
Metric rankings and percentiles
| Metric | Score | Rank | Percentile |
|---|---|---|---|
| Overall | 35/100 | 230 / 234 | Better than 2% |
| Tensile | — | — | — |
| Impact | 7/100 | 221 / 226 | Better than 3% |
| Stiffness | — | — | — |
| Consistency | 64/100 | 224 / 231 | Better than 3% |
| Layer adhesion | — | — | — |
| Thermal | 26/100 | 155 / 209 | Better than 26% |
Decision guidance
- Use this material mainly for low-load, visual or experimental parts.
- Review the listed alternatives if the application needs stronger overall performance.
- Do not choose it as a tensile-strength benchmark material.
- Avoid selecting it for impact-focused testing or shock-loaded designs.
Better alternatives
| MaterialID | Material | Manufacturer | Overall | Tensile | Impact |
|---|---|---|---|---|---|
| MAT0069 | ProtoPasta HTPLA Blood of My Enemies PLA Red | ProtoPasta | 100/100 | — | — |
| MAT0079 | Polymaker PolyLight PLA Pro Black | Polymaker | 65/100 | 35/100 | 52/100 |
| MAT0109 | Polymaker PolyMax PLA Black | Polymaker | 64/100 | 32/100 | 62/100 |
Peer context
Highest-scoring same-base-material peers from the current governed dataset. This context is descriptive and is not recalculated by the public renderer.
| MaterialID | Material | Manufacturer | Overall | Tensile | Impact |
|---|---|---|---|---|---|
| MAT0069 | ProtoPasta HTPLA Blood of My Enemies PLA Red | ProtoPasta | 100/100 | — | — |
| MAT0079 | Polymaker PolyLight PLA Pro Black | Polymaker | 65/100 | 35/100 | 52/100 |
| MAT0109 | Polymaker PolyMax PLA Black | Polymaker | 64/100 | 32/100 | 62/100 |
| MAT0080 | Polymaker PolySonic PLA Pro Blue | Polymaker | 64/100 | 30/100 | 58/100 |
| MAT0076 | BambuLab Tough+ PLA Tough+ Black | BambuLab | 63/100 | 26/100 | 59/100 |
| MAT0108 | Polymaker PolyLight PLA Black | Polymaker | 61/100 | 33/100 | 14/100 |
| MAT0074 | Winkle Matte PLA Matte Red | Winkle | 60/100 | 34/100 | — |
| MAT0122 | Add:North Enhanced PLA Clear | Add:North | 59/100 | 40/100 | 10/100 |
Public links
Methodology and limitations
Results are comparative 3DPIceland measurements from home-built test equipment. Thermal is a nearby BlueDOT probe-indicated fixture temperature, not ASTM D648, ISO 75 or specimen temperature. Missing evidence remains n/a. Scores and test results are not recalculated by this publishing layer and do not replace certified manufacturer datasheets or accredited laboratory testing.