Public printing recommendation
Prusa3D Prusament Light Yellow PVB Yellow
MaterialID MAT0038
3DPIceland Labs
Generated with 3DPIceland Engineering Platform v60.0.6 WORKFLOW-RELIABILITY - Bug Fixes and Workflow Reliability
2026-08-25 19:05:46
Guidance boundary: values below are shared base-material guidance resolved only through the canonical BaseMaterialId link. They are not manufacturer-, spool- or printer-specific validated settings. Missing fields remain Not recorded.
Overall
61/100
61/100
Engineering axes
6/5
6/5
Public rank
9 / 234
9 / 234
MSRP USD/kg
32.00
32.00
Engineering profile
Recommended applications
- Rigid brackets, fixtures and shape-stable prototypes
- Repeatable print jobs and production-style batches
Measured strengths
- Consistency: 86/100. Repeatability is one of the stronger signals in this material profile.
- Stiffness: 72/100. Stiffness is a relative advantage in this comparison group.
Limitations
- Tensile: 35/100. Avoid using this as the primary choice for tensile-loaded parts.
Engineering trade-offs
- Good repeatability does not compensate for low tensile capability in load-bearing designs.
Base-material printing guidance
| Guidance | Minimum | Recommended | Maximum | Unit |
|---|---|---|---|---|
| Nozzle temperature | 210 | 215 | 230 | °C |
| Bed temperature | 75 | 75 | 75 | °C |
| Print speed | 11 | 67 | 7 | mm/s |
| Cooling | 100 | 100 | 100 | % |
| Guidance | Value | Unit |
|---|---|---|
| Cooling guidance | Required | |
| Drying temperature | 60 | °C |
| Drying time | 8 | hours |
| Enclosure | Not required | |
| Printer / G-code reference | PrusaCoreOneL | |
| Slicer profile reference | Prusament PVB |
Print workflow checks
- Confirm nozzle temperature, bed temperature, speed, cooling and drying requirements from the manufacturer profile or spool label.
- Print a small validation part before committing to a long, costly or safety-relevant print.
- Orient the part so the governing load does not rely on an unverified or weak engineering axis.
Decision guidance
- Use this material for moderate requirements after checking the weakest axis.
Stronger same-family alternatives
| MaterialID | Material | Manufacturer | Overall | Tensile | Impact |
|---|
Confirm exact settings against the manufacturer profile, spool label and actual printer/material combination. Results do not replace application-specific validation.